Manufacturing the Best
Built to Stand the Test

Panther 6" Seamless Rollformer

Panther 6 Inch

Standard Equipment

  • Front pull guillotine
  • Seven station aluminum box
  • Emergency shutdown switch
  • Easy adjust entrance guides
  • Two quick release runout stands

Standard Upright System

  • 2 spool fixed upright & 1 aluminum spool
  • New aluminum spools less than half the weight of steel spools
  • Fixed upright system distributes the weight of the coils to the floor of the vehicle, not the machine

Specifications

Dimensions Top of spools to the bottom of machine 52"; Width 25"; Length 127" with straight blade guillotine. 129" with front pull guillotine. Construction 3/8" steel frame welded on a jig fixture for accuracy. Fully enclosed with 7 gauge steel sides. All parts individually painted prior to assembly.
Weight 1,200 lbs. Drive/Forming Rollers Fourteen drive forming rollers-8 bottom, 6 top. Rollers are 1045 high carbon steel with .002 industrial hard chrome.
Power 3/4 HP, high torque sealed motor. 1 HP reduction gear. Machine plugs directly into 110 - 120V outlet. Production Approximately 35 feet per minute
Recommended Materials
  • Maximum width 15"
  • Aluminum - .032 maximum gauge
  • Copper - 16 oz.-20 oz. 3/4 hard maximum gauge
Options
  • Straight blade guillotine
  • Additional runout support stands
  • 220 volt/50hz.
  • Single, double or triple spool upright available
  • CE Certification
  • 12 volt DC power
  • Trailer riser pad

Orientation

View step-by-step instructions to inspect, unpack and operate your new machine ›

Adjustment videos